Motor:
Powerful 1/2 HP, 115V single phase motor
with instant reverse and internal automatic reset thermal
overload. Removable without affecting limit switch settings.
Operator/Motor
Control: Dependable dual
relay system (NEMA 1 enclosure)
Control Circuit:
24V NEC Class 2.
Emergency Manual
Operation: geni garage
door opener Model MH provides easy emergency manual
operation using a floor level disconnect and an electrically
interlocked chain hoist mechanism.
Brake:
Heavy-duty solenoid actuated brake
standard on 3/4 HP and higher.
Wiring Type:
All geni garage door openers are factory preset to C2
wiring providing momentary contact to open and stop with
constant contact to close. Momentary contact to close (B2
wiring) can be easily set. The operator is pre-wired to
accept a sensing device, photoelectric control, radio
controls and most types of access control equipment.
Drive Reduction:
First stage heavy-duty 4L V-belt; second
and third stages #48 chain.
Bearings:
Heavy-duty oil-filled bearings.
Pushbutton Station:
3-button station for OPEN/CLOSE/STOP
functions is standard for all operators. Controls with one,
two and three buttons are available.
Construction:
NEMA 1 type electrical box, heavy-duty
11-gauge steel frame with baked-on powder coat finish, all
reduction sprockets drilled and pinned to shafts.
External Radio
Control Terminal: External
terminals provide quick, convenient connections for
universal radio controls.
Friction Clutch:
Adjustable friction clutch helps protect
against damage to the door and geni garage door opener should the door meet
an obstruction.
Control Accessories
and Options:
Sensing Edge:
(Recommended) Designed to sense an
obstruction and signal door operator to stop or reverse as
desired. Either an electric or pneumatic sensing device can
be added to bottom edge of door.
Radio Control:
Universal transmitters and receivers are
available to signal the operator to open and/or close.
Rolling Door
Interlock Switch:
Interlock switch disables the operator control circuit when
a manual door lock is engaged preventing damage to the door
and geni garage door opener .
Weathertight Control
Devices: A variety of
weathertight control devices are available including
3-button control stations, key control stations and digital
keypads.
CPS®
Commercial Protector System (Recommended):
An inexpensive
"non-contact" photo safety sensor designed to sense an
obstruction and signal the door operator to reverse to open.
Safety of a
non-contact infrared reversing sensor
Fast and
easy-to-install
Patented
electrical interface monitors system status at all times
